Talk to Danny | Ep. 16: Top 5 Uncomplicated Methods for Lavatory Maintenance

---

This week, Today’s Homeowner Radio Clearly show co-host Joe Truini delivers his Major 5 Uncomplicated Answers for the lavatory.

---

H2o Place Remover for Shower Doors

Does your glass shower door have h2o spots? They’re a soreness to get rid of, and common cleaners basically can not do the job. Very well, here’s a magic formula h2o spot remover that you could previously have with no noticing it!

No one wants to wipe their shower door each and every time immediately after they use it to protect against h2o places. And let’s be trustworthy — who has the time for that?

Which is why it will help to have the right resource for typical maintenance.

I like to use a glass cleaner with a components that incorporates rain repellant — like this a person. (This is an affiliate connection. If you order this solution, we will make a small commission at no extra cost to you.)

This kind of product is typically marketed for cleansing bugs and eradicating h2o places from car or truck or truck windshields, but that doesn’t mean it only is effective on these surfaces! So seem in the automotive aisle if you just cannot locate the solution near common cleaners.

Now, why does this solution function around basic house cleaners?

It’s due to the fact the rain-repellant formulation causes drinking water to bead up and repel off the shower doorway. That suggests your glass shower enclosure will have no h2o places!

Here’s how it functions: Only spray the cleaner on the glass and use a towel to wipe it off — I usually use a cotton microfiber towel.

Now you have an straightforward drinking water location remover! Not only is the glass clean, but it also repels water with no recognizing.

View: Straightforward H2o Spot Remover for Your Shower Doorway

---

How to Thoroughly clean and Deodorize Tub Sink

It is not normally you provide baking soda and vinegar into a lavatory, but you can use them to clean up and deodorize a toilet sink.

Sinks generally become sluggish-draining, and they can get clogged up with cleaning soap scum and hair. They will also make a quite funky odor, so here’s how to get rid of that.

Get started with a single-third cup of baking soda. You never have to be also precise, but you will require to get about a 3rd of a cup or so and dump it in the drain.

Future, consider just one entire cup of vinegar. White vinegar is a definitely strong cleansing agent that you can use all over the household.

Soon after it hits the baking soda, enable it fizz down for a handful of minutes. Some people may use bleach right here, but bleach can in fact eat the end appropriate off of some bathtub fixtures, so you do not want to use it.

Just after the baking soda and vinegar have calmed down a very little little bit, observe up with a whole kettle of incredibly hot h2o. This will, in mixture with the vinegar and the baking soda, cut by way of anything at all that may be clogging up the sink.

If you do this remedy the moment a thirty day period, you are going to have a actually sweet-smelling sink and a absolutely free-flowing drain.

Watch: The Simple Way to Clear and Deodorize Your Sink

---

How to Replace a Bathroom Flapper Valve

If you have a toilet that is frequently working, the offender is very likely a leaky flapper valve. Above time, flapper valves may perhaps develop into cracked or warped, which can permit h2o to leak out.

Here’s how to replace it:

• Transform the drinking water off to your rest room.
• Flush the h2o out so the tank is vacant
• Unhook the aged flapper valve and snap on the new one particular.
• Change the chain to make positive the length is appropriate.
• Convert the water again on and flush the rest room a couple of periods to make positive the flapper valve is doing work properly.

Look at: How to Exchange Bathroom Flapper Valve

---

How to Energy-Thoroughly clean Bathtub Tiles

Scrub brushes operate properly for cleaning, but they call for a large amount of elbow grease. To transform a conventional hand scrub brush into a electric power attachment for your drill:

1. Lower the cope with off a spherical scrub brush.
2. Drill a hole in the center of the brush.
3. Insert a 4-inch long device bolt in the hole from the bristle facet.
4. Put a washer and nut on the again aspect and tighten it up.
5. Chuck the bolt into a drill.
6. Run the drill at medium velocity when utilizing the scrub brush attachment.

Observe: How to Clear Tiles More rapidly Than At any time

---

How to Clean a Clogged Showerhead

Showerhead spray nozzles can grow to be clogged above time with mineral deposits located in tap water.

To clear a showerhead so it sprays uniformly:

• Location a plastic bag loaded with white distilled vinegar about the showerhead.
• Attach a twist tie close to the showerhead arm to hold the bag in put.
• Permit the showerhead to soak in the vinegar for a single to two times.
• Clear away the bag and flip the showerhead on full power.

If the nozzles are still clogged, repeat the soaking process until clear.

Check out: How to Clean a Clogged Showerhead

---

Further more Reading